Quality Commercial Tents
We take a White Quick Peak Tent (10×10) and transform it into a piece of art.
This whole top side of the tent is covered with removable decal. Applying it is easy! Just peel and stick! Once you’re finished with the decal, discard it and you have your white tent back.
Click here to find more information regarding our tent graphics at tentdecal.com
Call us for pricing and other information.
This is a Labor Union Logo on yellow background tent
It is digitally printed and then applied to the tent. We use precise digital printing and cutting to achieve this goal.
Click here to find more information regarding our tent graphics at tentdecal.com
Call us for pricing and other information.
Slip Fitting – 2 Way Corner Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip Fitting – 2 Way Corner 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip Fitting – 3 Way Corner Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip Fitting – 3-Way Flat Corner
For use on flat fittings or where braces and support are needed to secure the tent. Or use it as a partition inside the tent.
Please call us if you have questions regarding these types of fittings.
Purchase a 20×20 or higher tent top or frame and get a FREE Removable Decal Digitally printed FREE
Size 28×28 in.
* Print only – Contour cut, Artwork re-creation, Color Match and installation cost available at minimum cost.
Call for other details.
Slip Fitting – 4-Way Flat Tee
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
If that special project called for an odd shape, special characters, or simply round or rectangle cut, Central Tent can make that happen. Please send us approximate shape and size of your cutting project, we will generate a cut file and cut that fabric or graphic pattern to size for you.
This picture describes how we attached an EXTRA rope to the outside of the Tension / Quick Peak tent so the standard rain gutter can be attached to the outside of the tent. This process has to be done when you order the tent.
This rope line add-on cannot be install after the product is made.
Slip Fitting – 5 Way Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip Fitting – 2 Way Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip Fitting – One Way Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip Fitting – 4 Way Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip fittings product line. 3-way slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
This picture is of a clear Quick Peak Tent. We made this tent with reinforcement all around for greater strength.
Please see clear material disclosure here.
This is a custom clear tent therefore additional ones will likely be a little different from the picture shown.
Slip Fitting – 6 Way Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Here is a link to the Possibilities Poster enhanced image file.
Press the image to get full page pdf.
The Standard Octagon Tent consist of 8 side openings with 8 legs total.
Sizes ranges from 8×8 to 40×120.
Octagon is often used in replacing of round tent as round tent is not easily transport.
You can make Octagon to many style, such as
* Standard style
* Standard Tension Style
* Standard Quick Peak Style
* Standard Clear
* Standard Expandable style
It also comes in various sizes from 8×8 to 40×120. Colors such as yellow, white, black, clear, green, blue and others can be combined to make variety of beautiful tents. Graphics are also available.
Below is the picture of a 30×30 Quick Peak Octagon Tent
This is a Tension Style 20×20 Octagon Tent
Another Picture of the 20×20 Tension Octagon Tent
This is a standard style 20×20 Octagon but with two color (Yellow-White)
Slip Fitting – Corner Slide Tee 2 in.
For use on flat fittings or where braces and support are needed to secure the tent. Make 90 degrees partitions, walls, or dividers.
Please call us if you have questions regarding these types of fittings.
** Note ** This product is the same as C1237 – Mid Back Corner Gable Extension
Slip Fitting – 3 Way Slide 2 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
This standard hip roof frame tent with tension style top has clear fabric. The tent is shown with a nice black trim and a 20 foot expandable middle.
This particular tent is in a tropical Hawaiian setting.
Call us with questions regarding purchasing a similar style tent.
Slip Fitting – 4-way Slide 2 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Slip Fitting – 2 Way Slide 2 in.
For use on flat fittings or where braces and support are needed to secure the tent. One that can intersect poles with one slide and one connection.
Please call us if you have questions regarding these types of fittings.
At Central Tent, we take pride in making our products. One of our proudest achievements is our sidewalls.
What is special:
1. We use stainless steel top buckles. No one has this buckles. Almost all companies use steel buckles which will eventually rust. They might have plastics buckles which will not hold against strong environments.
2. We attached pole wrap for frame tent. The pole plastics buckles helps level the sidewalls so the sides do not sag and tip to one side from another.
3. We also use stainless steel grommets – The cost is more and harder to put into the sidewalls – but we did it to make it last.
4. We seal all French lines on windows. We don’t paint or tape the lines which does not look authentic.
5. We have pole pockets to make sure the sides can be weighted down.
6. We use reputable commercial Velcro closure. Velcro is not the same, if you use cheap Velcro, the sidewall will not last long.
7. We have stake ties. Stakes can be weighted down so the sidewalls don’t flaps. Of course, we have the pole pocket, but this is an extra option which most companies don’t want to deal with.
These sidewalls are proven with over 20 years of business experiences. We take pride in what we do and ensure that we give out quality products. Please call or email for more questions or get a custom quote.
Here is the general sidewall information:
Here is the windows sidewalls information:
Here is a solid sidewall information:
Here is the sidewall with flaps information – The flap style can be combined with other styles such as windows, clear, food booth, door, and so on…
Here is the café Windows sidewall information:
Information about the clear sidewall is here…
Food Booth Sidewalls:
Sidewall with door information:
Overlap Style sidewall. Has extra 12 in. each side to wrap around the leg pole to make side tighter. Bottom is 8×20 sidewall but actual size is 8×22.
Remember, clear fabric is not reinforced and it needs to be handled properly.
Slip Fitting – One-way Slide 2 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
Can also be used for assembly of bally rails
*** Please note that there are two types of these fittings. Depending on your use, please select the proper type:
1. C1110 to use on the end pole
2. C1110-A to use on the middle pole.
This is a customized tent styled like a barn.
In the picture, it is a white tent, however, most opt to use different colors such as red, green, or tan.
We can make this tent up to 40 ft. wide.
This is an ideal tent for graphics and for use in promotional type events. We can place your graphics on this tent.
Aspire Tee – Rafter Slide 2″
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
This large graphic was done one section at a time. Most of the area is sectional to save cost.
Step into a realm of visual splendor with our 40×60 large tent adorned in captivating graphics that tell your unique story. Meticulously crafted, each section of the tent is a canvas, allowing for a tailored masterpiece that aligns with your brand or event theme.
The process of creating this large graphic spectacle is an artful journey, undertaken one section at a time. This meticulous approach not only ensures precision but also presents a cost-effective solution, enabling you to achieve a grand visual impact without compromising your budget.
We understand that every detail matters, and that’s why we invite you to connect with us. Let’s delve into the specifics of your vision, exploring how this customizable 40×60 tent with graphics can elevate your event or brand presence. Whether it’s a corporate affair, a product launch, or a celebratory gathering, our team is dedicated to turning your ideas into a visual reality.
Embrace the power of tailored aesthetics and make a lasting impression on your audience. Give us a call, and let’s embark on the journey of creating an unforgettable visual experience that sets your event apart. Transform ordinary spaces into extraordinary showcases with our 40×60 large tent – where every section speaks volumes, and every detail contributes to a visual narrative that resonates.
Call us so we can discuss details if you are interested in this type of graphics.
This 40×40 tension tent is put up for weeks at a time by a church. This church has events many times throughout the year.
Slip Fitting – Corner Slide 1 in.
For use on flat fittings or where braces and support are needed to secure the tent.
Please call us if you have questions regarding these types of fittings.
This 30×40 special flat valance installs between two containers. The legs rest on the container itself. In addition, the customer uses a ratchet spreader in the middle to tie down the top to the frame. This is required for a long term install in anticipation of frequent Florida rains. This structure is a Double Tube Style with standard fittings to secure the tent in place.
Here is a picture of our tent used as a boat dock. The size on this one is 15×30
We have to use the Leg Braces to stabilize the legs so it will not sway around. Also, the Rafter Crossbar on the center of the tent will help stabilize this structure.
This Tension style 10×10 features an easier fit to the top of the standard frame. Replacing the standard top to the newer style is very common.
Introducing our 4″x 8″ Base Plate
A cornerstone in construction stability designed for Quick Peak applications. This meticulously crafted base plate serves as the robust foundation for a wide array of structures, ensuring unparalleled support and durability in every project.
Crafted from high-quality materials, the 4″x 8″ Base Plate is engineered to withstand the rigors of construction, providing a stable platform for your Quick Peak structures. The dimensions are precisely calibrated to offer optimal balance and support, making it an indispensable component for various applications, from event tents to temporary shelters.
The design of our base plate prioritizes ease of use without compromising strength. The 4″x8″ size strikes a perfect balance, offering ample surface area for stability while remaining manageable for quick and efficient installations. This versatile base plate adapts seamlessly to diverse terrains, making it an ideal choice for both indoor and outdoor construction projects.
Installation is a breeze with the user-friendly design of the Quick Peak 4″x8″ Base Plate. Its compatibility with Quick Peak structures ensures a hassle-free setup, allowing you to focus on the task at hand. The secure connection between the base plate and the supporting structure guarantees stability, giving you confidence in the longevity of your construction.
In addition to its functional excellence, our 4″x8″ Base Plate boasts a sleek and professional aesthetic. The attention to detail in the design not only enhances its visual appeal but also reflects the commitment to quality that defines our products. The base plate seamlessly integrates into the overall design of Quick Peak structures, providing both form and function.
Whether you are a seasoned contractor or a DIY enthusiast, the 4″x8″ Base Plate for Quick Peak is a must-have for your construction arsenal. Trust in its durability, appreciate its ease of use, and elevate your projects with the stability that only our base plate can provide. Invest in excellence, invest in the 4″x8″ Base Plate for Quick Peak – where stability meets innovation.
For use in Tension and Quick Peak Style Tents.
Also, Tension Style and other tents that require a rope line tension on the bottom leg
This Blue-White Stripe is standard stripe on our standard 10×10. The 30 in. wide is seamed with panels of cut materials. The result is better UV resistance. Most color comes with 15 oz. translucent fabric.
This extends the leg by increment of 3 in. up to 57 in. For Tension / Quick Peak Style Tent.
This base plate is to extend legs so tent can be even on uneven grounds. Ideal for golf course, hill sides, pools, stairs, and other uneven surface adjustments.
** Adjustments are made every 3 in.
There are other available size from 1 ft. to 5 ft. in height.
Most of the time, Tent tubes should not be spliced. (cut down for two or more connections on one span) However, there are some instance where those tubes need to be spliced. The following are methods and recommendations in splicing of tent tubes:
Double Tube Splicing:
This is splicing for single tube 2 in. (note: below is part SPL06 – Splicing for 2-10′-6″ to make 1-21’10.5″)
or Just straight simple splicing (Below is part SPL07 – Simple splicing (simple cut 0-3.5-7.0)
There are many ways to anchor the Frame Tent to the ground. Frame Tents are designed to be tied to a stake. However, there are many instances where stakes can not be used. Many factors will determine the holding power of your tie-downs. Please considered them carefully. Below are certain environment that determine the effectiveness of the holding power:
– Wind speed, direction, and gusts
– Snow forecast
– Rain forecast
– Temperature forecast
– How long the tent will stay on location
– Surface of ground and soil density
– Type and size of the tent
– What bracing and tie-downs the tents has
– Sidewalls attached
– Tiedown type
– and many more…
Let us know if you have any questions in chat or by calling us.