Quality Commercial Tents
Gable 4-way joint, for use with 4-way gable crown on larger tents such as 20x, 30x, and 40x.
with 2 in. lower leg recessed.
*** NOTE *** Make sure there might be a newer version of these fittings…..
G05-A, offset for 2 in. lower to accommodate Gable corners pole
3/8 in. Galvanized Shackles to hold the cable in place.
Shackle 3/8″ for use as cable stabilizer, Cable extender. With Screw pin anchor.
Parts:
Wood Back Clamp Plate for 2 in. or double tube pole.
Usually this clamps onto the leg to make sign mounts, electrical panel mounts, TV mounts, and much more.
Available for either 2 in. pole or double tube pole.
For securing 2 in. tube into existing walls.
Introducing Bally Rail Set 36 ft. x 20 ft. Steel Pole D-Tube Slide Clamp
Elevate your workspace or outdoor tent setup with the 10 ft long Single Rail Bally Rail, a versatile solution for partitions, counters, and safety rails. Its adaptability extends to securing sidewalls during windy conditions, ensuring stability and protection. This sturdy rail comprises a 10ft steel bar set, conveniently connected by a push button for seamless assembly. The set includes two C1071 D-Tube Slide Clamp, 2 – C1071 D-Tube Slide Clamp, ensuring secure attachment to any surface. With a 2 – 3/8″ Nuts and Bolts, and 1 – Steel Pole 20 feet with welded tab, the Rail offers exceptional strength and durability.
20ft long for versatile applications: This extended length makes the ideal for creating partitions, counters, and safety rails in various settings.
Ideal for partitions, counters, and safety rails: Whether you need to divide a large space, create a serving area, or enhance safety measures, the Bally Rail is a perfect choice.
Doubles as a sidewall bottom tie-down for wind protection: Secure your sidewalls during windy conditions and ensure the stability of your outdoor tent or structure.
Includes two C1071 D-Tube Slide clamps with studs for secure mounting: Easily attach the Bally Rail to a variety of surfaces, ensuring a solid and dependable connection.
10ft steel bar set with push-button connectors for easy assembly: The push-button mechanism makes the assembly process quick and straightforward, even for those with limited DIY experience.
Steel Pole 20 feet with welded tab: With its robust construction, the Bally Rail can withstand heavy loads and provide long-lasting support.
The 20 ft long Rail is an indispensable addition to any workspace or outdoor tent setting. Its versatility, durability, and ease of installation make it the perfect choice for a wide range of applications. With its ability to enhance partitions, counters, safety rails, and sidewall protection, this is a must-have for those seeking a practical and dependable solution. Whether you’re setting up a temporary workspace, organizing a party, or securing your outdoor tent, the Bally Rail is the versatile tool you need.
Double Tube Corner Two Tab Screw Style
It is used to control brackets on corners, slide and brace with cables, weigh down sidewalls, corner braces, and much more use.
Please use with double tube pole commercial tent system.
Bally Rail with Custom Graphics 36 in. x15 ft.
Comes complete with:
2 – Quick clamp 10 ft. Steel Bally Set
1 – Large 3 ft. x 10 ft. with pocket banner. (Graphics size is 36 x 115)
Elevate your workspace or outdoor tent setup with this Set 10 ft. with Custom Graphics, a versatile solution for partitions, counters, and safety rails. Its adaptability extends to securing sidewalls during windy conditions, ensuring stability and protection. This sturdy rail comprises a 10ft steel bar set, conveniently connected by a push button for seamless assembly.
Custom Graphics
** This sign modification is to be placed on tents only. **
** We can build continuous side rails using corners and tee railing. Please call for details. **
Please choose from the available graphics options. The lowest price will include one color (red, white, black or blue) decal work. Full color options are available.
Shipment is via truck only.
Packing List:
This One Way Double Tube Quick Clamp is a versatile clamp that can be used to:
1. Add a leg.
2. Clamp additional support to existing double tube frame
3. Add rafter, hip, or sign structure.
This concept umbrella span of 18’8″ and made from 2″ pole to maximize the aluminum poles stocked by most rental companies.
We use 4 poles and 1 long main pole coupled with slide fittings to generate this type of structure. Please note, combination of poles can be used to create the
umbrella. The top need to be made special.
The concept tent explanation:
We will manufacture the tent to the best possible standard to be as close to the illustration as possible. Since this is a custom product, we will need to sell the product complete to be able to setup in house as well as test for possible flaws. The products will not have any engineering or wind loads calculations attached. This custom manufactured products will need more time than usual to make since we have to do it from scratch. Please consults with our team for any questions. Purchasing this product assumes that you know all the limitations of this and how to set up commercial products. We will not have any documentations of this product and will only available via phone to help.
This kit is to convert Standard West Coast Style Tent to a Quick Peak Style Tent. The kit comes with all necessary parts to convert 30 or 40 wide tent into a Quick Peak Style Tent
For reference, the parts are as followed:
1 ea. C1058-B, Lightweight Crown Adapter
1 ea. C1062, Mast Flag for Quick Peak (Maybe 2 pcs for shipping)
1 ea. 7′-8″ Pole (Drill at 5′-3″ for 30x , and at 7′-6″ for 40x)
3 ea. A02, Canopy Pins
** This kit will fit standard 8 way or 6 Way Crown (not included!). You may need this to make the kit complete if tent is missing the part. **
*** When setting up for a 30 or 40 wide tent, please have several people helping because the top is very heavy and may tear fabric easily. ***
** Please note that this set does not come with 4 pieces tension corners that maybe needed to square the tent. You may need to replace corners to ease setup because the corners will help guide and square the tent tops. Refer to C1181 (Tension Corners) to see more information. ** Also the long pole may be made into two pieces to help ease shipping.
For converting 20X, 30X & 40X Frame Tent to Quick Peak Tent.
This conversion fitting needs to be used with 6 Way Crown (C1006) or 8 Way Crown (C1007) with an inner diameter of 3.5 in.
2 in. Flat Stamped D-Ring can be used in a variety of applications. Primarily to tie down ratchet ropes to stakes.
We can create custom webbing and tie-downs for you. Call us for more details.
Part: DR61
Slide Snap with D-Ring
use to control brackets, slide and brace with cables or ropes, weight down sidewalls, and much more use.
Please use 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
Introduction to 20×20 Sign Package 2
This is a Graphic Logo Promotional Tent Package with Color Band
A Complete Quick Peak Tent 20×20. This 20×20 Sign Package 2 tent is combination of graphics along with color banding
This is What you will get:
1 20×20 Quick Peak Frames with Fittings
1 20×20 White Quick Peak Tent top, with Fire retardant / Commercial Fabric. With banded fabric and logo in the front.
1 – Logo size limit to 50×50 in. with one location imprint.
*** Price do not include Art recreation and other Art fees:
Common Art fees are:
This also will not include:
Extra Stakes and ropes for tent tie down to the ground. (You may need 8 of each depends on what type of terrain you are putting your tent in)
Setup and takedowns
Cost of securing tent
additional graphics or lettering
File Preparation
Please call us for more details.
Sales Ref: Master Order: 2122349
At Central Tent, our tents are made in the USA and are built with components that meet strict guidelines.
Within our facilities, our tents can be customized to your exact specification. Below are some of the things that we can do to make your tents unique:
Call us with your specifications and we will help you with your tent needs.
If you have any questions or comments, you can contact Central Tent by messaging us here on this website, calling us at 800-997-8368, or using the email form below, and we will get back to you as soon as possible.
This concept tent is a 20×20 Quick Peak Tent with five horizontal colors. It will fit a 20×20 Quick Peak Style frame. It will also fit the standard 20×20 tent frame using conversion kit.
All Tent colors is available. Red, White, Blue, Yellow, Burgundy, Tan, Green, Hunter Green, Orange and Purple.
Graphics can also be pasted on to the tent. We recommend to decal it on the color materials.
This configuration is available from 10×10 through 20×20. A 30 and 40 wide is available using conversion kit.
The concept tent explanation:
We will manufacture the tent to the best possible standard to be as close to the illustration as possible. Since this is a custom product, we will need to sell the products complete to be able to setup in house as well as test for possible flaws. The products will not have any engineering or wind loads calculations attached. This custom manufacture products will need more time than usual to make since we have to do it from scratch. Please consults with our team for any questions. Purchasing this product assumes that you know all the limitations of this and how to set up commercial products. We will not have any documentations of this product and will only available via phone to help.
This concept tent is a 30×30 tent with a purlin that add a volume onto the tent top. This tent add another shape onto the tent and make the tent have more room inside.
All Tent colors are available. Red, White, Blue, Yellow, Burgundy, Tan, Green, Hunter Green, Orange and Purple.
Graphics can also be pasted on to the tent. We can provide graphics quote if needed.
This configuration should be available for all sizes call us and ask for details and prices.
The concept tent explanation:
We will manufacture the tent to the best possible standard to be as close to the illustration as possible. Since this is a custom product, we will need to sell the product complete to be able to setup in house as well as test for possible flaws. The products will not have any engineering or wind load calculations attached. This custom manufacture products will need more time than usual to make since we have to do it from scratch. Please consults with our team for any questions. Purchasing this product assumes that you know all the limitations of this and how to set up commercial products. We will not have any documentations of this product and will only available via phone to help.
This concept tent is a 20×30 tent with approximately half of the top is one color and other half is another. The valance is also another color.
All Tent colors available: Red, White, Blue, Yellow, Burgundy, Tan, Green, Hunter Green, Orange and Purple.
Graphics can also be pasted on to the tent. We recommend to decal it on the color materials.
This configuration should be available for all sizes call us to ask for details and prices.
The concept tent explanation:
We will manufacture the tent to the best possible standard to be as close to the illustration as possible. Since this is a custom product, we will need to sell the product complete to be able to setup in house as well as test for possible flaws. The products will not have any engineering or wind loads calculations attached. This custom manufactured products will need more time than usual to make since we have to do it from scratch. Please consults with our team for any questions. Purchasing this product assumes that you know all the limitations of this and how to set up commercial products. We will not have any documentations of this product and will only available via phone to help.
Metal Surcingles are used on tent tops to expand parts of the tent in expandable modules.
This product is coated steel.
Umbrella Sand Stake 2″
This fitting is made to support steel or wood poles that comes with umbrellas. The receiver can receive up to 2″ diameter poles. Using hammer or staking equipment to strike it in sand or soft ground to secure the fittings.
Introducing the Umbrella Sand Stake 2″, a revolutionary accessory designed to redefine your beach-going experience. This innovative sand anchor is meticulously crafted to provide unparalleled stability for your beach umbrella, ensuring that your seaside retreat is not only stylish but also secure.
Crafted from durable, corrosion-resistant materials, the Umbrella Sand Stake 2″ boasts a robust 2-inch diameter auger that effortlessly drills into the sand, creating a solid foundation for your umbrella. Its cutting-edge design takes into account the challenges posed by windy beach conditions, delivering a reliable solution to keep your umbrella firmly anchored.
Say goodbye to the frustration of traditional umbrella anchors that struggle to withstand the forces of nature. The Umbrella Sand Stake 2″ is engineered to resist the strongest winds, offering peace of mind while you relax under the shade. Its user-friendly installation process requires no special tools, making it an ideal companion for beachgoers of all ages.
Designed with convenience in mind, this sand stake is lightweight and portable, making it easy to transport to and from the beach. Its compact design ensures that you can enjoy a stress-free setup wherever your coastal adventures take you.
Elevate your beach experience with the Umbrella Sand Stake 2″ – where reliability meets convenience. Embrace worry-free relaxation and make a statement on the sands with this essential accessory that promises to redefine your beach day essentials.
This products is not made for concrete or hard asphalt.
This commercial grade tent that has been widely used by professional renters for various events and purposes such as weddings, warehouse storage, rental businesses, and amusement centers. These tents are designed to withstand heavy usage and harsh weather conditions, making them a reliable option for any occasion. One of the key features of these tents is their interchangeability, allowing them to be customized to meet specific needs and requirements. Additionally, they offer great adaptability, making them an excellent investment for long-term use.
10×10 Standard Frame Tents consists of three major components:
Suggestion – additional tie-downs may be needed:
8 – Stakes (on soft or asphalt ground)
8 – Ratchet Ropes (For tie-downs)
4 – Base Plates
* In addition to stakes; rain gutters, sidewalls, and other accessories may also be required to complete the setup of the tent. Moreover, tie downs and braces may be necessary to ensure the tent stability in windy conditions.
* We also carry color tops for this tent – Colors include: red, white, blue, green, yellow, or combination. Color tops can also be horizontally or vertically striped. Additional charges will apply. Please call for details.
* A clear tent top for this tent is also available. Please call for details.
Put two tents together with one leg.
This fitting also makes space for the two tents to space out equally. These features can be useful to properly use rain gutters effectively.
The usual legs to place are 7ft (6′-8″) and make to match the 8 ft (7′-8″) leg size.
This 6-sided corner fittings will make Hexagon tent and will need one 6 way Hexagon crown to complete the tent.
The tent can be in size from 10×10 to 40×40
The size of the hexagon is measured from edge to edge of the hex.
Bottom bracket for Central Tent Door.
Attached to the existing door frame and attaches to the existing 2″ tent leg.
The price is per set of 2.
This rope is what we use for our sidewall line. The rope features a strong braided type and very minimal stretch. UV resistant so it will not break down in the sun. Features soft touch, sewable, and very minimal stretch.
Sold in 1,000 feet spool only.
Part: Rope001
This rope is what we use for our sidewall line. The rope features a strong braided type and very minimal stretch. UV resistant so it will not break down in the sun. Features soft touch, sewable, and very minimal stretch.
Sold in 1,000 feet spool only.
Part: Rope001
Here is a list of items currently on sale at Central Tent.
Cafe Sidewall has a large clear panel in the middle with approximately 12 ft. white border on the top and sides. Bottom border is about 36 in.
Lap and Snap Sidewall (8×20) 10 in. space to wrap around the leg poles to itself and secure the sides of the sidewall in place. Also meant to connect to each other.
Lap and Snap sidewall with windows (8×20) 10 in. space to wrap around the leg poles to itself and secure the sides of the sidewall in place. Also meant to connect to each other.
Emergency Exit Sidewalls (8×20) with velcro closure door to ensure occupant have access to outside the tent.
Sidewall 8 or 10 ft adjustable: fold over the longer buckles strap to use the 8 ft. wall. A combination of various height can be use. Great for unknown or uneven legs or hill installation.
There are many styles and types of Tent Sidewall to help our customers to ensure compatibility and conveniences.
Tent Sidewall Standard Features:
Warning:
Tent sidewall are made of the same fabric as the tent tops. Since the sidewalls typically hang down from the tent top, the fabric is stressed. All points need to be anchored securely to prevent flapping. Most damage occurs from winds whipping the fabric against the frame or against the ground. To prevent damage to the sidewalls:
Commercial Tent Sidewall 10′ X 10′. 10′ high x 10′ wide
Made out of Commercial Grade Vinyl Laminates.
Features:
* Fire Retardant material meets the highest California Fire Marshall Standard
* Commercial Grade Vinyl features three or four layers of vinyl
* Stainless Steel Buckles on top of the wall for long lasting use
* Pole strap to make sure the sidewall weight is evenly supported
* Velcro closure for connecting to other sidewall system
* Stainless Steel Grommets for long lasting use and prevent rust-dirt
* Stake Strap ties the wall to the ground
* Pole pockets to prevent excessive flapping in windy situation
* All stitches are sewn using highest quality thread
* RF heat seal for long lasting seams
Material available in 15 oz. standard blackout
Standard colors are white. Special Colors available: Red, Blue, Green, Fuchsia, and Black
All sidewalls can have different options. Please inquire for details about special options
This is a list of PDF versions of Central Tent’s tent diagrams.
<< Click Here for Full Catalog >>
Splicing for Double Tube with 0.5 in. stop in the middle.
This splicing is for use to add 0.5 in. length for the 2″ pole
Cut any size tent poles and drill holes on each end about 3-1/4″ to accommodate this splicing.
The poles have a metal line that is added to the edge of the metal to make them fit tight with the double-tube aluminum pole.
Embark on a new era of structural flexibility with the D-Tube Splicing 0.5″ Extension – a cutting-edge solution that redefines adaptability in construction and assembly. This innovative extension introduces a level of customization and convenience that stands out in the realm of structural support systems, offering a versatile approach to meet diverse project requirements.
The 0.5″ extension is a testament to precision engineering, providing an extra half-inch length that can make all the difference in achieving the perfect fit for your structures. Whether you are working on a construction site, setting up a temporary framework, or engaging in industrial projects, this extension empowers you with the ability to fine-tune your assembly with unparalleled accuracy.
The D-Tube Splicing 0.5″ Extension boasts a user-friendly design that simplifies the splicing process. Its seamless integration with D-tube components ensures a smooth and secure connection, reducing assembly time and effort. The extension not only adds flexibility to your structural configurations but also enhances the overall stability, ensuring that your projects meet the highest standards of safety and reliability.
One of the standout features of this extension is its compatibility with various D-tube sizes, making it a versatile addition to your toolkit. Whether you are working with standard dimensions or custom specifications, the 0.5″ extension seamlessly adapts to your needs, offering a level of adaptability that is crucial in the dynamic landscape of construction and assembly.
In a world where precision and efficiency are paramount, the D-Tube Splicing 0.5″ Extension emerges as a game-changer. Elevate your structural projects to new heights by embracing this innovative solution that combines ease of use with unparalleled adaptability. Experience the freedom to customize and optimize your assemblies with confidence, as you delve into a new era of structural possibilities with the D-Tube Splicing 0.5″ Extension.
Splicing for Double Tube. with 8 in. stop in the middle.
This splicing is for use to add 10.5 in. length for the Double Tube Pole
Cut any size tent poles and drill holes on each end about 3-1/4″ to accommodate this splicing.
The poles has a metal lines that added to the edge of the metal to make the fit tight with the Double Tube Aluminum pole.
Common Extension for this is for (2)9′-4″ to make (1)19’4″
SKU#:SPL02
Splicing for Double Tube. with 10.5 in. stop in the middle.
This splicing is for use to add 10.5 in. length for the 2″ pole
Cut any size tent poles and drill holes on each end about 3-1/4″ to accommodate this splicing.
The poles has a metal lines that added to the edge of the metal to make the fit tight with the Double Tube Aluminum pole.
Common Extension for this is for (2)10′-6″ to make (1)21′-10.5″
Splicing for 2 in. with 10.5 in. stop in the middle.
This splicing is for use to add 10.5 in. length for the 2″ pole
Cut any size tent poles and drill holes on each end about 3-1/4″ to accommodate this splicing.
The poles has a metal lines that added to the edge of the metal to make the fit tight with the 2″ OD x .125″ Aluminum pole. (ID:1.75 in)
Common Extension for this is for (2)10′-6″ to make (1)21′-10.5″
Splicing for 2 in. with 8 in. stop in the middle.
This splicing is for use to add 8 in. length for the 2″ pole
Cut any size tent poles and drill holes on each end about 3-1/4″ to accommodate this splicing.
The poles has a metal lines that added to the edge of the metal to make the fit tight with the 2″ OD x .125″ Aluminum pole. (ID:1.75 in)
Splicing for 2 in. with a stop in the middle.
This splicing is for use with a straight cut without extension for the 2″ pole
Cut any size tent poles and drill holes on each end about 3-1/4″ to accommodate this splicing.
The poles have metal lines that are added to the edge of the metal to make the fit tight with the 2″ OD x .125″ Aluminum pole. (ID:1.75 in)
Approximately hole location is (0″ – 3.25″ – 6.50″) total length is 9 in.
Concrete Round cover 18″ x 18 ” High
Cover can be covered in graphics – call us for prices.
Finished size 18″ Round x 18″ High in.
Concrete block cover for Block and Roll brand concrete weight. Cover is white fabric 15 oz.
Cover can be covered in graphics – call us for prices.
Finished size 20x20x22 in.
Concrete block cover for Block and Roll brand concrete weight. Cover is white fabric 15 oz.,
Cover can be covered in graphics – call us for prices.
Finished size 20x20x12 in.
Simple splicing that allow you to cut or make a longer 2″ pole.
The poles has a metal lines that added to the edge of the metal to make the fit tight with the 2″ OD x .125″ Aluminum pole. (ID:1.75 in)
Your poles need to have drilled holes approximately 3 1/4 in from each end of the pole.
Approximately hole location is (0″ – 3.25″ – 6.50″) total length is 12 in.
Part #SPL07
