Quality Commercial Tents
Cable for 10 feet wide, slide directly on legs.
If you have a long 10-wide tent, especially more than 30 feet (ex: 10×40), you need this to clamp from tee joint to tee joint to stabilize your width to be exactly 10x. This will help decrease the pressure of the Top Tee Joint (C1008) so it will hold during windy conditions.
Sidewall extension help extend sidewall height.
** Note picture shown are for 20 ft extension the width on this product is 10 ft.
Cable for 10 feet, quick clamp style.
If you have long 10-wide tents, especially more than 30 feet (ex: 10×40), you need this to clamp from tee joint to tee joint to stabilize your width to be exactly 40x. This will help decrease the pressure of the Top Tee Joint (C1009) so it will hold during windy conditions.
The clamp is tied to the fitting (usually Tee joint) to each of the opposite sides of the tent.
Plastic sidewall clips, Stay put style with push-in tab
insert into #2 Grommet
Sidewall Clips – Stainless Steel Buckle Fix Spring Snap.
This sidewall buckle features stainless steel geared for tent sidewalls. Made from marine grade stainless steel so the part will not rust.
Other uses are possible.
Note: clips only – does not come with ropes nor webbings featured.
2in. 3 Way Slide 2 tab
use to control brackets on Tee joint, Corner or Straight Tee, slide and brace with cables, weight down sidewalls, Tee Joint Braces, Corner Braces, Division Rooms, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
Cable X Cross Braces: Comes in Quick Clamp or Slide
Style. These braces make the tent stable. If there are available side
bays that you do not use or you anticipate putting sidewalls up, consider
the X cross brace to stabilize the legs or rafter. 10, 15, or 20 ft
available. Bottom Support Bar is needed.
The braces are also good for higher legs requirements.
Cable are Aircraft Grade steel and Minimum load is 10,000 Lbs so it is strong enough to take the brace load.
Please call us so we could build your custom cable for your needs.
Brace Slide Style Corner D-Tube
use to control brackets on corners, slide and brace with cables, weight down sidewalls, Corner Braces, and much more use.
Please use with Double Tube. pole commercial tent system.
2in. Straight Slide 1 tab
use to control brackets on Tee joint or Straight Tee, slide and brace with cables, weight down sidewalls, Tee Joint Braces, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
2in. Straight Slide 2 tab
use to control brackets on Tee joint or Straight Tee, slide and brace with cables, weight down sidewalls, Tee Joint Braces, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
2in. 3 Way Slide 1 tab
use to control brackets on Tee joint, Corner or Straight Tee, slide and brace with cables, weight down sidewalls, Tee Joint Braces, Corner Braces, Division Rooms, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
2in. 3 Way Slide 2 tab
use to control brackets on the Tee joints, Corner or Straight Tee, slide and brace with cables, weight down sidewalls, Tee Joint Braces, Corner Braces, Division Rooms, and much more use.
Please use 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
2in. 4 Way Slide 1 tab
use to control brackets on Tee joint, Corner or Straight Tee, slide and brace with cables, weight down sidewalls, Tee Joint Braces, Corner Braces, Division Rooms, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
2in. 4 Way Slide 2 tab
use to control brackets on the Tee joints, Corner or Straight Tee, slide and brace with cables, weight down sidewalls, Tee Joint Braces, Corner Braces, Division Rooms, and much more use.
Please use 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
2 in. Corner Slide 1 tab
use to control brackets on corners, slide and brace with cables, weight down sidewalls, Corner Braces, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
Slide Snap 1 way 1 tab Slide Snap 1 way 1 tab
use to control brackets, slide and brace with cables, weight down sidewalls, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
Bally Rail set. 3 ft x 15 ft.
Bally Rail set. 3 ft. x 10 ft.
Introducing our innovative Raingutter Tension System, specifically designed for Quick Peak tents with a Frame and Cable Style structure. This cutting-edge solution redefines the standard for rainwater management, ensuring optimal performance and longevity for your outdoor shelter.
The Raingutter Tension System is a pivotal addition to Quick Peak tents, providing a seamless integration of form and function. Engineered with precision, this system combines the strength of a robust frame with the flexibility of a cable style structure to create a reliable and efficient solution for rainwater drainage.
Designed to withstand diverse weather conditions, the Raingutter Tension System enhances the overall performance of Quick Peak tents. The robust frame ensures stability, while the cable style construction allows for adaptability, making it suitable for a variety of outdoor environments. Whether you’re hosting events in rainy or windy conditions, this system is engineered to excel.
One of the key features of the Raingutter Tension System is its efficient drainage capabilities. The system is strategically designed to direct rainwater away from the tent, preventing pooling and potential damage. This not only protects the structural integrity of the tent but also ensures a dry and comfortable space for occupants during inclement weather.
Installation is simplified with the user-friendly design of the Raingutter Tension System. The frame and cable style components seamlessly come together, offering a hassle-free setup process. This means less time spent on assembly and more time enjoying your outdoor event.
In addition to its functional excellence, the Raingutter Tension System contributes to the overall aesthetics of Quick Peak tents. The design is sleek and modern, complementing the tent’s appearance while delivering superior performance. It’s a perfect fusion of style and substance, enhancing the overall appeal of your outdoor space.
For those seeking a reliable solution to weather challenges, the Raingutter Tension System for Quick Peak tents is the ultimate choice. Elevate your outdoor experience with a system that marries advanced engineering with practical design, ensuring your events remain memorable, rain or shine. Invest in the future of outdoor shelter solutions with our Raingutter Tension System – where form meets function with precision.
Rain gutter Curve to both sides to accommodate Tension, Quick peak, or Frame and Cable tent.
The rain gutter is Straight with a slight shift to one side for water flow. Use the same material as tent top fabric. Also features stainless steel buckles for no rust parts.
Slide Snap 1 way 2 tab for 2 in. Tent pole
use to control brackets, slide and brace with cables, weight down sidewalls, and much more use.
Please use with 2 in. pole commercial tent system.
Inside Diameter: 2.1 in
8 in. Pole Connector is a flexible connector to be coupled with Quick Clamp Fittings, Rafter Crossbars, or Leg Braces. Please use 3/8×1 in. bolts, and nuts to assemble it.
The possibilities are endless. You can create railings, leg braces, flag poles, banner poles, or spacer clamps out of our quick clamp fittings line.
Call us if you have questions about quick clamp fittings.
Rain Gutter Holder. for 2 in. or D-Tube
This fitting is used for placing a stand-alone Rain Gutter on one tent. *NOT TWO TENTS PUT TOGETHER* You would have to put the rope onto the holder to tie Rain Gutter.
Two of these fittings are needed as a set to hang this gutter in place. You also would need to use some or all parts below:
C1045 – 8 in. pole connector and/or cables or ropes for hanging rain gutters across.
Any rigid poles (or Aluminum Poles) to stabilize the gutter together.
Available in 10, 15, or 20 feet long. Use a standard or Quick Peak rain gutter.
*** This fitting could be used for Flag Holder as well ***
Optional pole bracing is available using swivel two (2) pole connectors and a pole to fit leg span size.
This Slide Style Sign Holder can hold signs, flags, and banners.
Slide the 2 in. Tube into this and extend up to 20 ft. high.
Commercial Tent Sidewall 8×40
Material available in 15 oz. standard blackout
The default color is white. Special Colors available: Red, Blue, Green, Fuchsia, and Black
All sidewalls can have different options. Please inquire for details about special options
Bally Rail Set. 3 ft. x 10 ft. One aluminum pole (9′-4″) to accommodate leg spread or sidewall weight. Bally can also be used for crowd control, barrier, or banner hanger. The Quick Clamp Style Clamp is used and it is not a slide-on. So, we can put this on after the tent is up.
Double Tube Quick Clamp to 2 in. Quick Clamp for Corner of D-Tube legs
Used for flags, banner holders, and for reinforcement of double tube poles and 2 in. pole
Double Tube Quick Clamp to 2 in. Quick Clamp fixed to 90 degree.
Used for flag, banner holders, for reinforcement of Double tube poles and 2 in. pole
 |
Double Tube Quick Clamp to 2 in Quick Clamp Swivel so you can turn it to any angle.
Used for flag and banner holders
For reinforcement of Double tube poles and 2 in. pole
Material available in 15 oz. standard blackout
The default color is white. Special Colors available: Red, Blue, Green, Fuchsia, and Black
All sidewalls can have different options. Please inquire for details about special options
Central Tent’s Premium 8×20 Tent Sidewall, crafted with the same high-quality materials as our renowned tent tops. Designed to meet the highest-grade fire standards, this sidewall guarantees compliance with most permitting processes. Our exclusive pole straps and bottom pockets enhance compatibility, ensuring secure and stable usage even in the most rigorous conditions. Elevate your tent experience with Central Tent’s Premium Sidewall – where quality and functionality seamlessly come together.
Elevate your events with the Central Tent Sidewall System, a meticulously crafted solution designed to enhance functionality and durability for a seamless outdoor experience.
In standard white, our Sidewall System sets a sophisticated tone. For those looking to add a splash of color, we offer special options in Red, Blue, Green, Yellow, Tan, Orange, and Black. To provide even more versatility, we also offer mesh and clear sidewalls, allowing you to customize your setup according to your specific needs.
What sets our Sidewall System apart is its adaptability. Tailor your sidewalls to your preferences with various options available. For more information on these special options, feel free to inquire, and we’ll be delighted to provide you with the details you need.
Transform your events with the Central Tent Sidewall System – where style meets practicality, and customization knows no bounds.
All sidewalls can have different options. Please inquire for details about special options.
Commercial Tent Sidewall 7×40
Made out of Commercial Grade Vinyl Laminates.
Features:
* Fire Retardant material meets the highest California Fire Marshall Standard
* Commercial Grade Vinyl features three or four layers of vinyl
* Stainless Steel Buckles on top of the wall for long lasting use
* Pole strap to make sure the sidewall weight is evenly supported
* Velcro closure for connecting to other sidewall system
* Stainless Steel Grommets for long lasting use and prevent rust-dirt
* Stake Strap ties the wall to the ground
* Pole pockets to prevent excessive flapping in windy situation
* All stitches are sewn using highest quality thread
* RF heat seal for long lasting seams
Material available in 15 oz. standard blackout
Standard colors are white. Special Colors available: Red, Blue, Green, Fuchsia, and Black
All sidewalls can have different options. Please inquire for details about special options
Commercial Tent Sidewall 7×30
Made out of Commercial Grade Vinyl Laminates.
Features:
* Fire Retardant to the highest California Fire Marshall Standard.
* Commercial Grade Vinyl Features three or four layers of vinyl
* Stainless Steel buckles on top of wall for long lasting use.
* Pole strap to make sure the sidewall weight is evenly supported.
* Velcro Closure for connect to othe sidewall system.
* Stainless Steel Grommets for long lasting use and prevent rust-dirt.
* Stake Strap to tie the wall to the ground
* Pole pockets to prevent excessive flapping in windy situation
* All stitches are sewned using highest quality thread.
* RF Heat seal for long lasting seams.
Material available in 13 oz. economy and 15 oz. standard blackout.
All sidewalls can have different options. Please inquire for details about special options.
Commercial Tent Sidewall 7×20
Made out of Commercial Grade Vinyl Laminates.
Features:
* Fire Retardant material meets the highest California Fire Marshall Standard
* Commercial Grade Vinyl features three or four layers of vinyl
* Stainless Steel Buckles on top of the wall for long lasting use
* Pole strap to make sure the sidewall weight is evenly supported
* Velcro closure for connecting to other sidewall system
* Stainless Steel Grommets for long lasting use and prevent rust-dirt
* Stake Strap ties the wall to the ground
* Pole pockets to prevent excessive flapping in windy situation
* All stitches are sewn using highest quality thread
* RF heat seal for long lasting seams
Material available in 15 oz. standard blackout
Standard colors are white. Special Colors available: Red, Blue, Green, Fuchsia, and Black
All sidewalls can have different options. Please inquire for details about special options
Bally Rail Set. 3 x 15 ft. One aluminum pole (14′-4″) to accommodate leg spread or sidewalls weight down. Bally can also be used for crowd control, barriers, or banner hangers. The Quick Clamp Style clamp is used and it is not a slide-on. So, we can put this on after the tent is up.
9′ x 20′ Gable Extension Tent. This tent is the smallest low profile tent.
Comes Complete with
– White Tension Style Tent Top
– Poles
– Fittings
– Pins
– Base Plates
Uses:
– Extend over the gable eve of a building.
– Extend from another tent.
– Smoking area on sides of building.
– Other uses.
9′ x 10′ Gable Extension Tent. This tent is the smallest low profile tent.
Comes Complete with
– White Tension Style Tent Top
– Poles
– Fittings
– Pins
– Base Plates
Uses:
– Extend over the gable eve of a building.
– Extend from another tent.
– Smoking area on sides of building.
– Other uses.
6′ x 20′ Gable Extension Tent. This tent is the smallest low profile tent.
Comes Complete with:
– White Tension Style Tent Top
– Poles
– Fittings
– Pins
– Base Plates
Uses:
– Extend over the gable eve of a building.
– Extend from another tent.
– Smoking area on sides of building.
– Other uses.
The Gable Extension tent is a compact canopy designed to be placed adjacent to a building or another tent. It is ideal for connecting the main venue to the event area, with widths available as small as 4 feet. This makes it easy to bridge even the smallest of gaps and create a seamless event experience for your guests.
The tent is constructed with a sturdy 2-inch aluminum frame system that can accommodate a variety of accessories. It also features a lower height ratio of 5:1, which provides a more intimate and inviting atmosphere for your event.
One of the key advantages of the gable extension tent is its customizability. You can choose the size and accessories that best meet your needs, and we are happy to work with you to create a solution that is tailored to your specific requirements.
If you are looking for a versatile and customizable canopy solution for your next event, the gable extension tent is the perfect choice. Contact us today to learn more about how we can help you create the ideal event space for your needs.